** REBUILT** Model EC Series EDGE COAT - Latex Cementing Machines

EC series gluing machines are designed for the adhesive application along the edge of a part. The open end (cantilevered) rollers that allow adhesive application to either the edge of a sheet or to the full surface. Available in four widths: 3”, 8”, 11” and 15”. The adhesive coating thickness is adjusted by means of a dial which controls the gap between the pickup roller that sits in the glue tank and the coating application roller. The standard machine can glue parts from the paper thickness to ¼” thick, but an optional model with floating feed roll can be used for adhesive application to parts up to 2” thick. The position of the feed table relative to the coating roller is adjustable so the machine can be set for gluing a narrow strip along the edge of a part or can be used for adhesive coating of the full surface. The edge cementing machine can be built with special rollers for coating stripe patterns or for ap­plication of a stripe of adhesive pre-set distance from the edge of the part. Edge coating machines are very popular for the application of latex cement to leather goods such as wallets, handbags and belts as well as to shoe and boot components. Also used for gluing many other products where a band of adhesive is needed: calendars, easels, sample books, specialty boxes, filters, toys etc. Made in USA!

FEATURES

• Increases production by 35%: Workers will devote more time to combining operations than with slow brushes
• Can be used for the application of many types of adhesives: latex cement, PVA & EVA resin cement, acrylic PSA adhesive, epoxy adhesive, ultraviolet cured adhesive, hot animal glue (heated glue tank) and many other types of coatings and adhesive formulations
• Easy to Clean: Instant tank and roller removal. The tank has open bearings for easy removal of the tank roller. No tools needed. Design allows glue to be cleaned from the machine in less than ten minutes.
• Trouble Free Performance: Due to the sturdy construction, many machines have reduced users’ production costs for 15 to 20 years without major repairs.